180-8676-6058

News

Current location:HOME>>News

How to maintain the paint on the surface of the crane cab

Date:2021-01-19Visits:452

  When we maintain the crane cab at ordinary times, besides the performance, we should also pay attention to the protection of the exterior. We should always keep the exterior of the crane cab bright so that we can feel it clean and graceful. How do we maintain the paint body of the crane cab? The specific methods are as follows.

  Under the sun's ultraviolet light, the paint film of the crane cab evaporates oil into the air from time to time to maintain itself.

  Under the sun's ultraviolet radiation, the paint film of the crane cab evaporates oil into the air from time to time to maintain itself.Over time the paint will burn off.The brightness and depth of the paint are greatly reduced, whitening the paint and forming an oxide layer.Sometimes cracks can occur due to the quality of the touch-up paint.It can be waxed to reduce cracks in paint.

  Stop checking the crane cab regularly to find out potential problems in time and prevent them from happening. At the same time, you will understand your car's behavior better and teach it to a better state.Check oil and brake oil, if short, replenish in time.

  Check chassis for oil and water leakage in crane cab.Check tyre pressure, tread wear, loosening of nuts.If you feel running off or swaying while driving, you should go to the service station to do four-wheel alignment or dynamic balance check.Check fan belt for damage or breakage and adjust belt tightness.Check the connection condition of the vehicle wiring harness, such as cracking, loosening and poor contact of the wireless skin.Be careful not to change coolant into clean water.

  A strong electrostatic layer is produced in the crane cab due to friction during driving.Electrostatic electricity has a strong ability to absorb dust, oil and chemical dust. It will form a hard traffic film over a long period of time. * It is easy to oxidize and corrode the paint surface. It can be treated by grinding and polishing.

  Crack: If necessary care is not taken for the paint finish of the crane cab, the metallic paint may produce a very fine crack that will penetrate the paint until it "pierces" the entire paint layer, a phenomenon called cracking.Sometimes cracks can occur due to the quality of the touch-up paint.Paint cracks can be reduced by waxing, etc.Regularly check the crane cab to find out potential faults in time and prevent them from happening. At the same time, you will know more about your car's behavior and teach it to a better state.

  We should use the correct method to maintain the body of the crane cab to prevent long-term moisture and check the vehicle frequently for abnormalities.

Share:
CLOSE
Copyright © Yangzhou Hanyang Construction Machinery Co., Ltd. Record No:苏ICP备2021003427号 Technical support: Changxi network